400KW Small Horizontal Shaft Francis Hydro Turbine , Francis Water Turbine Generator

Technical Specifications and Main Parameters:

Mode Horizontal Francis

Rated head 20.0 m

Rated discharge 2x2.391m3/s

Rated output 2x432KW

Rated efficiency 92.1%

Rated speed 600 rpm

Runaway speed 1060 rpm

Runner Diameter 65 cm

Suction head +2.0m

Runner material Stainless steel (0Cr13Ni4Mo)

Rotary direction Clockwise viewed from generator to turbine

Descrition:

The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to 300m. They are in both vertical or horizontal shaft arrangement and could be vastly selected by the hydraulic power stations.

lts feature is that the water flow enters the runner inward in a radial direction , changes direction gradually and then passes out axially. Francis turbine is characterized by reliable operation, simple construction and high efficiency, etc.

Main Structure of Francis Hydro Turbine

This hydraulic turbine type is Horizontal shaft Francis. A inlet valve is equipped in front of the spiral casing of the turbine. When viewed at the turbine from the generator end, the rotating direction of the hydraulic turbine is clockwise .The turbine is horizontal shaft and metallic spiral casing and the stainless steel runner. This unit has two bearings, assembled on the generator seat. The principal parts of the structure of turbine as follows:

1)Spiral case

2) Distributor

3) Rotating parts

4)Inlet tube

5) Draft tube

6) Layout for water,instruments and pipe-line

Water flows through penstock of the power station, Butterfly valve, expansion pipe, inlet tube, spiral case and wicket gates into the runner, and then it drives the runner to revolve and convert hydraulic energy into mechanical energy and drives the rotor of generator revolution by the force of the main shaft of turbine, thus converting the mechanical energy into electric energy.

Francis turbine Applications:

1. Water head: 10-- 300m

2. Power: 0.1MW--- 30MW

3. Frequency: 50/ 60hz

4. Synchronous Generator Output Voltage: 0.4KV, 6.3KV, or 10.5KV AC three phase,

If you are interested in the Francis turbine, you should send some key parameters (such as net head, flow discharge, unit number, frequency, voltage) in inquiry.

Normally, Medium size and larger Francis turbines are most often arranged with a vertical shaft, Small Francis turbine always arranged with horizontal shaft, but it is not absolute.

Competitive Advantage:

HYDROTU is the complete Chinese hydropower equipment supply, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.

With our Integrated Services concept, we provide you with customized support from project planning through implementation to plant commissioning and service. Our principle: Customer’s project is our project , customer’s success is our success.

HYDROTU covers the services, complete equipment supply, economic solution of the global hydropower projects and aims to be the best global supplier of hydropower equipment as well as the best integrated services provider on the hydropower markets.

HYDROTU are the complete Chinese hydropower equipment provider, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.

Hangzhou HydroTu Engineering Co. Ltd covers the services, complete equipment supply, economic solution of the global hydropower projects and aims to be one of the best global supplier of hydropower equipment as well as the best integrated services provider on the hydropower markets.

Already Running HYDROTU's Hydropower Project All Over the World

1. Already Running Hydrotu's hydropower Project Partial 1.pdf

2. Already Running Hydrotu's Hydropower project Partial 2.pdf

3. Already Running Hydrotu's Hydropower project Partial 3.pdf

Reference Layout Drawing of All Kinds of Hydropower Plant:

please visit our another website to download:

http://www.hydropower.com.cn/photosdrawings.asp

           Main Reference List of Hydropower Project worldwide By Hydrotu 

    (V-vertical;  H-Horizontal;  D1-diameter;  Hr- water head;  Qr- rated flow;  n-Speed)